I've been using 2010.3 on xp 32-bit version. I now have a 64-bit Win7 machine, and want to install the 64 bit version of the infragistics wpf dlls for CLR4, however, I can't seem to find them. When I download 2010.3, I'm not given a target OS choice, and after installation, Infragistics is installed only under ProgramFiles(x86). Can you please advise on how to obtain the 64 bit version? This is imperative as our application must run as a 64 bit application and therefore requires 64 bit version of Infragistics. Thanks a lot!
Hello Robert,
We do not provide any specially implemented/optimized controls for 64x OS/machines. You can use the originals ones which have been tested on all environments ( as shown here: http://ko.infragistics.com/support/documentation.aspx#SupportedEnvironments ) and are working as expected.
Please let me know if I can be of any further assistance or just verify this thread as answered so it help other forum users as well.
Sincerely,
Petar Monov
Developer Support Engineer
Infragistics Bulgaria
www.infragistics.com/support
OK. Then it must be that your dll's are compiled under Any CPU configuration, otherwise they wouldn't work in a 64bit process. Can you please confirm that? Thanks!
Yes this is exactly the case. Excuse me if I wasn’t clear enough.
Please let me know if I can provide any further assistance on the matter. If not please verify the thread as answered so that other users may take greater advantage of it.
Yes, this is answered. Thanks a lot!
Hello Anastas
Well! It works now.
Thanks
Geoffroy
Hello,
I have looked into this issue for you and this turned out to be a known issue, which is specific for French localized systems and which we have already resolved. We have also updated the download for the 10.3 installer on our website site. Would you please download the updated installer and try to reinstall the NetAdvantage and let me know if this solved the issue for you.
Regards,Anastas
Hi
I have recently reinstalled my pc : always the same configuration Win7 64 bits ultimate french, VS 2010 french and VS 2008 french.
If I install the Vol 2010.2 there is no problem. For the Vol 2010.3 it is always the same, I clic yes on the messagebox of UAC and nothing else. Any window appears.
The case you have opened is closed without any solution... I am very despite!