Hi, i'm trying to use xamDatachart using the LineSeries. I've set the thickness to 1 but it's still too thick a line to use. Using snoop i can see that 3 paths are actually created 1 with a fill and 2 with stroke applied. If remove the fill line and 1 of the path lines i get to what i want, an actual thin line.
I've attached 2 screenshots of before and after hiding the extra 2 paths.
Is there anyway to access these lines and remove them?
Hello Gleb,
Thank you for your post!
I have been looking into it. There are three paths in the LineSeries, currently only one of them is drawing the Series. Using a Snoop, when you hover over the Paths you would be able to see, that only one of them draws the line of the LineSeries.
What I can suggest is to set the Thickness property to a smaller value than 1. For example - 0.5. One other thing I can suggest is to set the Resolution property of the Series. More about this property you can find on the following links:
http://help.infragistics.com/Help/Doc/WindowsPhone/2012.1/CLR4.0/html/xamDataChart_Chart_Performance.html,
http://ko.infragistics.com/community/blogs/kiril_matev/archive/2011/04/07/tuning-the-xamdatachart-for-blazing-fast-charting.aspx.
Please do not hesitate to let me know if you have any further questions on this matter.
Thanks for the response Gergana.
All 3 lines are definitely being used, the two screenshots I made are from me changing the visibility of the lines via snoop.
In snoop we see:
Path - Fill set to a brush, no stroke
Path - Stroke set to a brush and thickness set to 1
All 3 paths have a slightly different data set as well.
I've also checked the WPF samples and we can see in the "Binding High Volume Data" sample it's quite obvious that 3 lines are being used.
Thanks.